High density robot

By setting up high-density robots on Windows server computer, the utilization of equipment can be effectively improved.
The use of high-density robots requires the following conditions:
1) Supports windows server and has installed BOT client on the computer;

2) Each BOT has created an account and logged in;

3) The operating system for installing BOT client needs to be configured to allow remote access;

4) The installed BOT client version is 5.7.2 and above.

1、 Management server

On the basis of completing the above conditions, we can start the management of high-density robots in the commander. First, you need to add the server related information to the commander, and then add the server user information that allows remote access to the commander. It supports the addition, deletion, modification and query of the server. It is necessary to fill in the name, address and port of the server, and ensure that the filled information is consistent with the server information of the operating system.

●name:Server name, required;

●Address:Server address, required. Make sure the entered address is correct, otherwise the connection to the server will fail;

●Port:Required. The port is the logical interface between the computer and the external network. The correct configuration of the port can ensure the normal connection with the server.

2、 Manage server users

It supports the addition, deletion, modification and query of server users. You need to fill in the user name and password. When filling in, you must ensure that the user name and password are correct, otherwise you will not be able to connect to the remote server. If you select automatic login when filling in the server user information, the user will automatically maintain the connection status. Once you go offline for various reasons, the system will automatically initiate the connection operation.

You can connect and disconnect users, and view the connection status and connected duration information. For users set to automatic login, manual connection and disconnection cannot be performed. If manual operation is required, please turn off automatic login first.